The wire order in Roblox Terminal [Escape Room] depends directly on whether you are running Chapter 2: Underground or Chapter 5, as well as whether your lobby is set to Beginner Mode or Standard Mode. In Chapter 2, cutting and reconnecting the 10 colored wires in the train's electrical maintenance hatch restores power to the door keypad. In Chapter 5, the breaker box requires linking numbered outlets based on specific circuit clues.
Terminal Escape Room Wire Order Solutions
Different chapters present distinct wiring puzzles with set rules. The table below outlines each primary wiring puzzle, its mode, and the exact order required to solve it.
| Puzzle Stage | Mode / Difficulty | Correct Wire Sequence |
|---|---|---|
| Chapter 2: Train Station Hatch | Beginner Mode | Brown, Pink, Yellow, Orange, Red, Blue, Purple, Black, White, Green |
| Chapter 2: Train Station Hatch | Standard Mode | Purple, Brown, Red, Green, Black, Orange, White, Pink, Yellow, Blue |
| Chapter 5: Electrical Room Outlets | Standard Mode | Green (1), Orange (2), White (3), Red (4), Blue (5), Pink (6), Yellow (7), Purple (8), Black (9) |
Chapter 2: Underground Wire Puzzle Walkthrough
Chapter 2 begins in the dark train tunnel after stopping the runaway train. The train triggers a 90-minute self-destruction countdown, requiring you to restore electrical power to reach the elevator.
Tools Required to Open the Hatch
Before touching the wires, pick up two mandatory tools from the starting station:
- Equip your flashlight to navigate the platform.
- Locate the screwdriver lying on the ground across from the train, placed near the artwork of flowers.
- Walk onto the train tracks near the opposite platform to pick up the scissors.
- Approach the metal wiring hatch on the exterior side of the train. Interact with the hatch using the screwdriver to remove all four corner screws, then use the scissors to cut all 10 exposed wires.
Beginner Mode Wire Order
In Beginner Mode, the reference poster on the opposite wall assigns numbers 1 through 10 directly to the cable colors:
- Brown: 1
- Pink: 2
- Yellow: 3
- Orange: 4
- Red: 5
- Blue: 6
- Purple: 7
- Black: 8
- White: 9
- Green: 10
Reconnect the severed wires in numerical sequence from 1 to 10: Brown, Pink, Yellow, Orange, Red, Blue, Purple, Black, White, Green.
Standard Mode Wire Order
In Standard Mode, the poster titled "A Beginner's Guide to Standardized Electrical Rewiring Protocol" presents a logic puzzle instead of direct 1-to-1 pairings. Solving the conditions sets the sequence to:
- Purple
- Brown
- Red
- Green
- Black
- Orange
- White
- Pink
- Yellow
- Blue
Once all 10 cables are slotted properly, the adjacent security keypad powers on, allowing you to input the door code (1379 on Beginner, or 2193 on Standard) to enter the Maintenance Room.
Chapter 5 Electrical Room Wire Connections
Chapter 5 Standard Mode features an electrical breaker board where nine colored wires connect into numbered wall outlets. The correct order relies on six logical constraints found in nearby files:
- Rule 5 and Rule 6 specify that the pink wire connects to an even-numbered outlet divisible by three, locking Pink into outlet 6.
- The black wire must only cross one other wire, and purple must plug directly above black in an even-numbered slot, placing Purple into outlet 8 and Black into outlet 9.
- Blue connects three outlets below orange in a straight vertical path, putting Orange at 2 and Blue at 5.
- White occupies outlet 3.
- Green occupies outlet 1 to cross three other wires including red.
- Red connects to outlet 4.
- Yellow connects to outlet 7, keeping yellow and red from crossing.
Connecting Green to 1, Orange to 2, White to 3, Red to 4, Blue to 5, Pink to 6, Yellow to 7, Purple to 8, and Black to 9 activates the terminal interface granting access to the Storage Room, Archives, and Surveillance Room.
Frequently Asked Questions
What happens if you cut or connect wires in the wrong order?
If you reconnect the wires incorrectly in Chapter 2, the circuit fails to complete, leaving the trackside door keypad unpowered. You can interact with the wires to reset your connections without detonating the train, though the 90-minute countdown continues to run.
Where do you find the tools for the Chapter 2 wiring hatch?
The screwdriver rests on the station platform floor directly in front of the flower wall art. The scissors sit on the train tracks near the opposite platform where you exit the train car.
Why is my Chapter 2 wire order different from my friend's game?
The wire order changes based on difficulty. Beginner Mode uses Brown first (following colors 1 through 10), while Standard Mode uses Purple first (following the electrical protocol poster logic).
